| Booth Dimension |
| - Internal Size(L×W×H) | 6900x3900x2700mm& 22'6''X12'8''X8'9'' |
| - External Size(L×W×H) | 7000x5400x3400mm& 23'X17'7''X11'2'' |
| Foundation and Floor |
| - Grid | 6 rows of grilles |
| - Metal Basement | Ramp inside of the booth |
| Wall and Door |
| - Steel Wall | Double construction with insulations EPS , thickness 50mm, width :1150mm, tongue and
groove interlock structure, with Polystyrene(EPS) insulation inside |
- 3-Folded Entrance Door
With Safety Glass Window | 1 Unit, 3000×2950 mm(WxH) , galvanized steel cover frame, with polystyrene(EPS) insulation inside |
- Operator's Door
With Safety Glass Window | 1Unit, 800×2000 mm(W×H) |
| Lighting System |
| - Ceiling Lights | 8Units, each 4×36 W, with electronic ballasts.Total 1728W |
| -Side Lights | 8Units, each 4×20W, with electronic ballasts.Total 1728W |
| Filter System |
| - Filter | Pre-filter, ceiling filter, exhaust fiberglass filter, activated carbon filter |
| Ventilation System |
- Intake air system
(Fresh Air) | 2X4KW double-intake centrifugal fan, , air capacity:25000 m3/h |
- Exhaust air system
(Exhaust Air) | 1Pc 4KW double-intake centrifugal fan, air capacity:15000 m3/h |
| - Damper actuates | Manual damper actuates from spraying to baking cycle, manual damper for exhaust air. |
| - Water air nozzle system | 48pcs of air nozzle, and two sets of 1.5KW extract fan. |
| Heating System |
| - Heating Exchange | Stainless Steel |
- Heating Exchange
Capacity | 260000Kcal/h |
- Max. Drying
Temperature | 80 °C |
| - Heating time | 10-15 min (from 20 to 60) by Drying Phase |
| - Heating Type (optional) | RIELLO G20 (260000 kcal/h) , Diesel burner, 1set |
| Control Box |
| - Control system | Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, thermostat,
power supply switch, emergency stop, ampere meter, voltmeter, hour meter,
temperature limit controller, pressure gauge, exhaust reduction voltage motor start,
water painting control. |
| - Total power | 19KW |
